Page 1
WO 04/109236, WO 05/096482, WO 02/095707, US 6,747,573, US 7,019,241 EnOcean GmbH Phone +49.89.67 34 689-0 Subject to modifications Kolpingring 18a +49.89.67 34 689-50 STM 320 / STM 320C / STM 320U User Manual 82041 Oberhaching info@enocean.com V1.05 Germany www.enocean.com April 26, 2013 8:59 AM...
Page 2
This information describes the type of component and shall not be considered as assured characteris- tics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the EnOcean web- site: http://www.enocean.com.
A LRN button is pre-installed on the PCB. When this but- ton is pressed a special teach-in signal is sent. There are three frequency variants – STM 320 in 868 MHz, STM 320C in 315 MHz, and STM 320U in 902MHz.
CE Approval The STM 320 module bears the EC conformity marking CE and conforms to the R&TTE EU- directive on radio equipment. The assembly conforms to the European and national re- quirements of electromagnetic compatibility. The conformity has been proven and the ac- cording documentation has been deposited at EnOcean.
Page 15
STM 320 / STM 320C / STM 320U OEM Requirements In order to use EnOcean’s FCC ID number, the OEM must ensure that the following condi- tions are met. End users of products, which contain the module, must not have the ability to alter the ...
STM 320 / STM 320C / STM 320U IC (Industry Canada) certification In order to use EnOcean’s IC number, the OEM must ensure that the following conditions are met: Labeling requirements for Industry Canada are similar to those required by the FCC. The ...
Need help?
Do you have a question about the STM 320 and is the answer not in the manual?
Questions and answers