Rear Fender & Footrests - Gio Electric WISP Owner's Manual

Rear Fender and Footrests
Begin and position the rear fender over the rear wheel. Secure the front of
the fender with the provided 2x M5*12 bolts. Then attach the fender
brackets to the sides of the fender with the 4x M5*10 bolts, 2 bolts on each
side.
Next align the holes of fender bracket with the mounting holes above the
axle, then align the the holes of the footrest bracket with the same
mounting homes and secure into place with 2x M6*12 bolts. Repeat for the
other side, making sure to mount the correct side bracket on each side.
Slide the plastic foot rest on to the footrest bracket and bolt into place with
2x M5*10 bolts. Repeat on the other side and cover holes with footrest
plugs.
Continued next page...
5