Gio Electric WISP Owner's Manual page 14

ALWAYS DISPOSE OF OLD BATTERIES THROUGH AN APPROVED BATTERY
RECYCLER, AND KEEP CHILDREN AND PETS AWAY FROM BATTERIES
Troubleshooting
Issue
No power / no lights
Power ON but eScooter doesn't
run
Charger not working
Battery not charging
Reduced running distance
eScooter doesn't stop when
applying brakes
12
♻
Possible Cause
Ignition Switch "OFF"
Battery not connected
Battery needs charging
Loose or damaged wiring
Throttle connection
Battery not connected properly
Battery low
Wires to controller loose
Wires to motor loose
Defective controller
Defective motor
No voltage in power outlet
Charger damaged/defective
Charger damaged/defective
Battery not connected properly
Battery damaged or at end of life
Battery not fully charged
Brakes making contact when not
applied
Tire pressure low
Battery at end of lifetime
Brakes not correctly adjusted
Brake cable loose
Solution
Turn to "ON"
Ensure battery properly
connected
Charge battery
Check connections between
ignition, battery etc.
Check throttle wires for proper
connection
Check and connect both battery
packs, fuse, etc.
Charge battery
Check and reconnect wires
Check and reconnect wires
Replace controller
Replace motor
Check wall outlet, use an
alternate outlet
Replace charger
Replace charger
Check and connect both battery
packs, fuse, etc.
Replace battery
Charge battery
Adjust brakes
Inflate to correct pressure
Replace battery
Adjust brakes
Place brake cable in proper
position
.