Related Manuals for Gio Electric TITAN
Summary of Contents for Gio Electric TITAN
- Page 1 TITAN MOBILITY SCOOTER OWNERS MANUAL - EN PRIOR TO FIRST USE, READ THIS MANUAL COMPLETELY AND ATTENTIVELY! IMPERATIVELY FOLLOW THE SAFETY INSTRUCTIONS! NONOBSERVANCE CAN LEAD TO INJURIES! CAREFULLY KEEP THIS MANUAL!
- Page 2 ⚠ Please note the following information to ensure your safety and get better use out of your GIO Titan Long Range Mobility Scooter Please read the manual prior to first use and do not permit anyone who has not, operate the vehicle.
-
Page 3: Table Of Contents
Table of Contents Riding Safety Overview Scooter Assembly Scooter & Control Diagrams Operating Your Scooter Maintenance & Care Specifications & Troubleshooting Warranty Information Riding Safety ALWAYS wear an approved helmet when riding your scooter ALWAYS steer with both hands ALWAYS drive with caution at appropriate speeds ALWAYS use your scooters turn signals and horn ALWAYS obey local traffic law ALWAYS be aware of your surroundings, pedestrians, traffic, etc... -
Page 4: Overview
Your Titan arrives 98% assembled and is ready in 5 simple steps. Step 1 Unpack your Titan - Untie or snip the wires holding your Titan in its protective frame and remove it from its packaging. Double check that your Titan includes the following components:... - Page 5 Basket Hardware Storage Tray Hardware Poncho Security Lock Step 2 Attach the basket - First attach the top to the rest of the basket with the provided small nuts & bolts x2 and then attach the entire basket to the rear of the seat with the included long bolts x4.
- Page 6 Step 3 Attach the mirrors - Safely stored for shipping, twist in the mirrors into place and tighten with a wrench. Step 4 Reconnect the battery - Your battery ships with the battery disconnected. Open the underseat compartment then lift and remove the gray plastic under-seat tray.
- Page 7 Locate the disconnected wire near the breaker switch, plug it back into the slot on the side of the breaker and tighten the screw above it to secure it into place. You can now flip the breaker to the on position (your alarm should chirp), replace the under seat tray and secure the tray into place with the medium bolts (x4).
-
Page 8: Scooter & Control Diagrams
Scooter & Control Diagrams Mirrors Armrests Headlight Seat Adjustment Levers Front Turn Signal Lights Basket Front Wheel & Fender Underseat Compartment Front Fork & Brakes Battery & Controller (internal) Steering Controls/Display Rear Turn Signal Lights Ignition Rear Brakes & Wheels Scooter Charging Port Motor (internal) Seat... - Page 9 Rear brake lever Front brake lever Headlight level switch Twist grip throttle Turn signal switch 3 speed switch Horn button Reverse switch USB power port Hazard light switch Coin holder Light control switch LCD display (see below) Horn button Bag hook Ignition LCD Display Turn signal &...
-
Page 10: Operating Your Scooter
(keys or fob) it can ONLY be turned off with the same method. Driving your Scooter The Titan features a variable twist throttle on the right handlebar. (See steering controls diagram) Gently twist the throttle grip inwards to slowly accelerate to the desired speed. - Page 11 Your scooter features control switches next to the throttle grip that adjust driving features. The upper switch labeled 1-3 sets the current speed setting of the scooter. (Setting approximate speed: 1 -5mph(9km/h), 2 - 10mph(15km/h) 3 - 20mph(32km/hr)) The lower green switch drives the scooter in reverse at 3mph(5km/h).
- Page 12 Remote fob and alarm system The GIO Titan features an alarm system that is controlled with the included fob. This fob can also be used to turn the scooter on and off remotely.
- Page 13 Adjusting your scooters seat The seat on the Titan has several adjustments. The position of the seat can be shifted forward or backward by engaging the lower adjustment handle, on the right hand side below the armrest, and moving the seat's position.
-
Page 14: Maintenance & Care
To ensure the safety and reliability of your scooter, do not modify your scooter, and always use parts, i.e. charger, specifically designed for the GIO Titan. Alway make sure your scooter is turned off before performing any maintenance! Inspection List... - Page 15 Battery ⚠ Always charge your battery with the included charger, do not substitute with a different charger. For best performance, charge after use and avoid completely draining the battery by recharging it before the meter reaches zero. The battery in your scooter requires regular charging, even when not in use, to maintain its life.
- Page 16 Tires The Titan is equipped with tubeless tires, these require less maintenance, and are less prone to flats compared to traditional tube tires. However, damage and flats are still possible. The condition of your tires not only directly affects the ability to drive your scooter but also its general performance.
-
Page 17: Specifications & Troubleshooting
Specifications & Troubleshooting Specifications Motor: Differential 48v 500w Ground Clearance: 2.5" (6cm) Battery: 48v 20ah lead acid Seat Height: 29” (74cm) from ground Brakes: Drum Front/Back Wheel Base: 48” (120cm) Tires: 10” D3.00 Tubeless Wheel Track: 27” (67cm) Top Speed: 20mph(32km/h) Turning Radius: 47”... -
Page 18: Warranty Information
There are no warranties that extend beyond the description in this limited warranty. GIO Electric guarantees this product, including charger, motor, controller, to be free of manufacturing defects for a period of 12 months. All warranty periods commence from the date of shipment. - Page 19 11400 Twigg Place Unit 1 Richmond, BC, V6V3C1 CANADA E-Mail: support@gioelectric.zendesk.com Website: www.giomobility.com Tel: 1-855-907-4211 © GIO Mobility, 2022. All Rights Reserved...