Maintenance And Care; Pre-Ride Checklist - Gio Electric WISP Owner's Manual

The charging time for the Wisp is 8-10 hours. If charging does not finish
after 12 hours, it is likely a problem has developed, unplug the charger and
contact GIO Customer Service. It is normal for the charger to get warm,
and always be sure it is well ventilated, unobstructed and kept dry at all
times.
Your Wisp comes included with a charger, do not use a charger not
designed for your specific eScooter model. Unless the riding distance was
very short, it is generally advisable to fully recharge the battery after each
ride. This will ensure the longest possible battery life. If the battery is left in
a low state of charge for long periods of time the total battery life will be
diminished. Avoid dropping the battery or charger. Never put anything on
top of the charger when charging and keep it dry at all times. Please keep
the charger out of reach of children.
NOTE: YOU SHOULD NEVER RECHARGE YOUR BATTERIES UNATTENDED. IF AT
ANY TIME YOU NOTICE YOUR BATTERIES GETTING HOT TO THE TOUCH OR IF
THEY EMIT ANY ODOR, IMMEDIATELY STOP THE CHARGING PROCESS AND
CONTACT CUSTOMER SERVICE.

Maintenance and Care

Pre-ride Checklist

Ensure headlight is in working condition
Ensure brakes are in proper working order and can be easily and
comfortably engaged when the levers are squeezed
Ensure all screws, nuts, bolts and parts are securely fastened and
adjusted.
Make sure the tires are not excessively worn, do not have tears or
cuts, are properly seated on the rim and correctly inflated
Make sure the wheels spin straight and that the rims are not bent or
damaged
Ensure you are wearing a well fitted helmet of the correct rating.
Ensure battery is fully charged
⚠
9