Table of Contents
Advertisement
Delta 1220 'TRIPLE X-RANGE' DIESEL STERNDRIVE RIB
3.
Operation
3.1
Controls
When seated in the helm position, the throttle levers are to the right, which control
the gear & rpm of the two engines. To the left of the helm on top of the top box, are
the power trim controls, which should be used with reference to the trim gauges.
General controls are of standard marine type for this kind of craft. Steering is
hydraulic over hydraulic to provide smooth effortless control with minimal feedback.
Engine gearbox and rpm are cable operated by the throttle unit mounted on the
right of the helm. The mid position of the lever is neutral (i.e. no drive). When the
levers are pushed forward the craft accelerates forward. To stop pull the levers back
to neutral. Push levers down to reverse. The separate trim switches allow trim
adjustment.
Due to the neutral interlock safety system the engine cannot be started when
the gearbox is in either forward or reverse gear.
WARNING:
6900 U1
Do not start the engine with the drive engaged. Ensure
that the throttle control is in the neutral (central) position.
10
Advertisement
Table of Contents
