Table of Contents
Advertisement
6 Disposal information
6.1 Disposal of appliance at end of life
Before disposing of the machine, make sure to carefully check its physical condition, and in
particular any parts of the structure that can give or break during scrapping.
The machine's parts must be disposed of in a differentiated way, according to their different
characteristics (e.g. metals, oils, greases, plastic, rubber, etc.).
Different regulations are in force in the various countries, therefore comply with the provi-
sions of the laws and competent bodies in the country where scrapping takes place.
In general, the appliance must be taken to a specialised collection/scrapping centre.
Dismantle the appliance, grouping the components according to their chemical characteris-
tics, remembering that the compressor contains lubricant oil and refrigerant fluid which can
be recycled, and that the refrigerator and heat pump components are special waste assimil-
able with urban waste.
The symbol on the product indicates that this product should not be treated as domestic waste, but
must be correctly disposed of in order to prevent any negative consequences for the environment and
human health. For further information on the recycling of this product, contact the local dealer or agent,
the Customer Care service or the local body responsible for waste disposal.
Note!
When scrapping the machine, any marking, this manual and other documents con-
cerning the appliance must be destroyed.
6.2 Disposal of packing
The packing must be disposed of in compliance with the current regulations in the country
where the appliance is used. All the packing materials are environmentally friendly.
They can be safely kept, recycled or burned in an appropriate waste incineration plant. Re-
cyclable plastic parts are marked as following examples.
Polyethylene:
• Outer wrapping
• Instructions bag
Polypropylene:
• Straps
Polystyrene foam:
• Corner protectors
Installation manual
11
Advertisement
Table of Contents
