Related Manuals for Electrolux CI6-80
Summary of Contents for Electrolux CI6-80
- Page 1 Installation manual Cold Ironer CI6-80 427001235/EN Original instructions 2020.09.28...
-
Page 3: Table Of Contents
Contents Contents 1 Safety Precautions................5 General safety information ............5 Symbols ................... 6 2 Technical data..................7 3 Attachment..................8 4 Electrical connection ................9 Alternative electrical connection ............ 9 5 Function check .................. 10 6 Disposal information................11 Disposal of appliance at end of life .......... -
Page 5: Safety Precautions
Installation manual 1 Safety Precautions This appliance can be used in public areas. Remove all objects from pockets such as lighters and matches. WARNING. This appliance is intended only for drying textiles washed in water. DO NOT MODIFY THIS APPLIANCE. Servicing shall be carried out only by authorized personnel. -
Page 6: Symbols
Installation manual 1.2 Symbols Caution Caution, hot surface Read the instructions before using the machine. Be careful. The ironer is top heavy and can tip over easily. -
Page 7: Technical Data
Installation manual 2 Technical data fig.W01417 1060 Switch Control gate Folding work table Collection bin Feet Anti-tip protection Cylinder diameter: ⌀ mm Cylinder length: Cylinder speed: rpm: Cylinder pressure: Net weight:... -
Page 8: Attachment
Installation manual 3 Attachment Do not use the ironer unless it is screwed to the wall fig.W01418 The ironer comes with 2 brackets and 2 screws for securing the brackets to the ironer. • Position the ironer in the intended location. •... -
Page 9: Electrical Connection
Installation manual 4 Electrical connection The electrical installation may only be performed by qualified personnel. The ironer is delivered ready for connection, with cable and grounded plug. A grounded electrical outlet must be found within 2 m of the right side of the ironer. The iron- er has a 2 m grounded cable with plug connected at the bottom right-hand side. -
Page 10: Function Check
Installation manual 5 Function check May only be performed by qualified personnel. A function check must be performed when the installation is finished and before the appli- ance can be used. Whenever a repair has been made, a function check must be performed before the appli- ance can be used again. -
Page 11: Disposal Information
Installation manual 6 Disposal information 6.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g. - Page 14 Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...