Table of Contents
Advertisement
Version 6.25
Analyzer LED Descriptions
When powered on, the SATA Analyzer activates the user-accessible controls and LEDs
on the front and rear panels of the CATC 10K.
Warning!
Figure 2: Front Panel (Internal single lane connector -
Figure 3: Front Panel (4 Port External connector -
Front Panel
LEDs (from
left to right)
Connectors
on the SATA
Analyzer
Module
8
Do not open the CATC 10K enclosure. There are no user serviceable
parts inside. Refer servicing to LeCroy.
A
PWR (power) - Green indicator LED for CATC 10K. Lights when the unit
power is switched on.
B
Status indicator - Red indicator LED for CATC 10K. Lights during
initialization/power up of CATC 10K base unit. Blinks if a self-test fails.
C
REC (recording) - Green LED. Lights when the unit is recording.
D
TRG (triggered) - Orange LED. Lights when the unit triggers on an event.
E
UPLD (Upload) - Green LED. Lights when trace is being uploaded from the
analyzer to the PC.
F
Manual Trigger - Push-button. Allows a manual Trace capture.
G 1 - 4 (Link Channels 1 - 4) - Green LEDs. Lights when a connection is
established on the corresponding link.
•
Plug-in Modules
SS002MAA-X & SS003MAA-X
Connectors (4).
•
Plug-in Module
SS004MAA-X
SS002MAA & SS003MAA-X)
SS004MAA-X)
use single-lane Serial ATA
use 4 port Infiniband style connectors (1).
SATASuite User Manual
LeCroy Corporation
Advertisement
Table of Contents
