Installing Rm Model Fans - QuietCool AFG Installation Manual

9. Place fan into the cut out area. Fasten the fan in each 4 corners to the vertical wood studs (see
Figure 2.3E).
10. Caulk exterior around frame (see Figure 2.3F).
11. Attach the exterior cover to mounting frame using 4 sheet metal screws (see Figure 2.3G).
12. Mount inside wall grille (see Figure 2.3H).
Figure 2.3E
2.4

Installing RM Model Fans

1. Determine which roof area you would like to install your QuietCool Roof Mount Fan. (see Figure 2.4D)
IMPORTANT:
you are installing the RM fan as a whole house fan without a duct, move on to step 2b. If you are
installing the RM fan as an attic fan, for homes with an attic space, move on to step 3.
2a. When installing your RM fan as a ducted whole house fan, find the exact ceiling location for your
ceiling box using a stud finder. Be sure that the ceiling box will fit between the ceiling box location
and fan location with a minimum of 20" clearance. Now, using a drywall saw, cut out the drywall (using
the rough opening measurements shown in Figure 2.4A).
2b. When installing your RM fan as a whole house fan without a duct, find the exact ceiling location for
your ceiling damper grille using a stud finder. Now, using a drywall saw, cut out the drywall (using the
rough opening measurements shown in Figure 2.4A). Install your ceiling damper grille.
3. Mark the location for the roof mount fan. (using the rough opening measurements shown in
Figure 2.4A)
4. Move to the roof and, using a circular saw, cut out the square. (see Figure 2.4B)
5. With the square cut out, place the roof mount fan over the cutout. (see Figure 2.4C)
6. Fasten the fan to the roof using appropriate connectors for your roof material.
7. Fasten and flash in fan curb using appropriate weatherproofing and materials based on roof material.
8. If installing the RM fan as a ducted whole house fan, install the duct to the fan. Place the ceiling
box in the cutout and attach the duct. Install the ceiling box by fastening it to the ceiling joists.
(similar to Figure 2.2D). Install the ceiling grille. (similar to Figure 2.3H)
6
Figure 2.3F
If you are installing the RM fan as a ducted whole house fan, move on to step 2a. If
Figure 2.3G Figure 2.3H
QUIETCOOLSYSTEMS.COM