PaloAlto Networks ION 1200 Series Hardware Reference Manual page 82

Install ION 1200-S
STEP 1 | Slide one of the adjustable mounting brackets into one of the fixed mounting brackets
to create a mounting rail. Repeat for the second mounting rail. The adjustable and fixed
brackets are the same for the left and right side.
You may also use the two-post configuration to rack mount the device using a cross-bar at the
rear to prevent the racks from flaring out.
STEP 2 | Align the bottom edge of the mounting rails to the bottom of the 1 RU rack space reserved
for the device. Align the slotted holes in the adjustable mounting bracket to the holes on the
rear of the equipment frame.
The mounting rails are designed for equipment frames that are 26" to 32" deep.
ION 1200 Hardware Reference
82
2022 Palo Alto Networks, Inc.
©