PaloAlto Networks ION 1200 Series Hardware Reference Manual page 55

Install the ION 1200
STEP 2 | Insert the nano SIM in SIM 1 or SIM 2 slot by pushing the SIM in the slot till it is locked in its
position.
The SIM chamfered corner (sloping edge) indicates the insertion orientation into the SIM slot
as shown in figure below. Ensure to correctly insert the SIM in the SIM slot, incorrect insertion
may damage the SIM.
By default, SIM slot 1 is the primary SIM. If you have only one SIM, it is recommended
to use the slot 1 as the primary SIM. If you want to use the SIM slot 2 as the primary
SIM, you need to manually configure the SIM slot 2 as the primary SIM on the Prisma
SD-WAN web interface.
ION 1200 Hardware Reference
55
2022 Palo Alto Networks, Inc.
©