PaloAlto Networks ION 1200 Series Hardware Reference Manual page 34

ION 1200 Overview
2014/35/EU. The full text of the EU declaration of conformity for ION 1200 is available at
the following link:
ION 1200
The ION 1200-C-ROW and ION 1200-C5G-WW (with radio) comply with the requirements
set out in the Radio Equipment Directive (2014/53/EU). The full text of the EU declaration
of conformity for each model is available at the following links:
• ION 1200-C5G-WW
• ION 1200-C-ROW
• United Kingdom Declaration of Conformity (UKCA) Directives:
The ION 1200 (without radio) complies with the requirements set out in the UK Electrical
Equipment (Safety) Regulations 2016 and Electromagnetic Compatibility Regulations 2016.
The full text of the UK declaration of conformity for each model is available at the following
link:
ION 1200
The ION 1200-C-ROW and ION 1200-C5G-WW (with radio) comply with the requirements
set out in the UK Radio Equipment Regulations, 2017. The full text of the UK declaration of
conformity for each model is available at the following links:
• ION 1200-C5G-WW
• ION 1200-C-ROW
• Federal Communications Commission (FCC) statement for a Class B digital device or
peripheral: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit that is different from the one to which the
receiver is connected.
• Consult a professional installer for help.
ION 1200 Hardware Reference
34
2022 Palo Alto Networks, Inc.
©