PaloAlto Networks ION 1200 Series Hardware Reference Manual page 79

Install ION 1200-S
STEP 4 | Install the power adapter in the wall-mount bracket using the Velcro strap and cable tie.
Make sure to align the cable tie with the notches in the bracket to prevent the power cord
from falling out.
After you secure the power adapter to the bracket, mount the bracket next to the device using
wood or drywall screws as appropriate.
The following image shows a completed installation for an ION 1200-S with a single power
adapter. If you need a second power supply, you need to order a power adapter and an
adapter wall mount kit separately.
ION 1200 Hardware Reference
79
2022 Palo Alto Networks, Inc.
©