Case 4 How To Coat A Part Of A Document Stored In The Machine - Canon imagePRESS C1+ Manual

Case 4 How to Coat a Part of a Document Stored in the Machine

This section describes how to superimpose a clear image onto a
document previously stored in an inbox in the machine.
■ Finished Sample
■ Material Requirements
Image Form
NOTE
• Paper Drawer 1 is used as the paper source in this example.
• In this example, place the original for the image form on the platen glass.
• The optional Color UFR II/PCL/PS Printer Kit is used to print the image form
in this example.
CHAPTER 1 CHAPTER 1 CHAPTER 2 CHAPTER 2
Document in an Inbox
Back Previous Page
■ Workflow
4-1 Create the image form.
4-2 Place the original for the image form on the platen glass.
4-3 Store the image form.
4-4 Load the paper.
4-5 Superimpose the image form onto the document stored in an
inbox.

Case 4 How to Coat a Part of a Document Stored in the Machine

Next Page Search
K2-17