Case 2 How To Copy And Coat The Full Surface Of Paper Simultaneously - Canon imagePRESS C1+ Manual

Case 2 How to Copy and Coat the Full Surface of Paper Simultaneously

This section describes how to coat the full surface of the paper with the
clear toner while copying.
■ Finished Sample
■ Material Requirements
CHAPTER 1 CHAPTER 1 CHAPTER 2 CHAPTER 2
Original
Back Previous Page
■ Workflow
2-1 Load the paper.
2-2 Place the original.
2-3 Specify the coating settings.
NOTE
• Paper Drawer 1 is used as the paper source in this example.
• In this example, the original is placed on the platen glass.
• An image form is unnecessary for coating the full surface of the paper in this
example.

Case 2 How to Copy and Coat the Full Surface of Paper Simultaneously

Next Page Search
K2-9