Kraus Visio Series Installation Instruction

Single lever washbasin mixer

Dear Valued Customer,

Kraus would like to take this opportunity to thank you for purchasing Kraus products. It is our sincere

hope that you are completely satisfied with your new purchase. We welcome any questions or comments

you may have and look forward to assisting you in the future.

Sincerely,

Kraus customer service department.

1. Unpack your new product and ensure that all the parts are contained in the packaging.

Keep the product in its original box until you ready to install it.

2. Shut off the water supply if replacing a previously-installed faucet.

3. Observe all plumbing and building codes in your area.

4. It is recommended that installation of the product be done by a professional plumber.

Product Description and Measurements

Visio Series

Single Lever Washbasin Mixer

Thank You

Prior To Installation Steps

1-800-775-0703; or visit our website at www.

MODEL-KEF-14601

kraususa.com.

Table of Contents

Do you have a question about the Visio Series and is the answer not in the manual?

Page 1 Thank You Dear Valued Customer, Kraus would like to take this opportunity to thank you for purchasing Kraus products. It is our sincere hope that you are completely satisfied with your new purchase. We welcome any questions or comments you may have and look forward to assisting you in the future.
Page 2 MODEL-KEF-14601 Installation １２ Code Parts List Quantity ３４　　　５６Ｍａｉｎ　ｍｉｘｅｒＣｏｎｎｅｃｔｉｎｇｃｏｖｅｒ７Ｃａｒｔｒｉｄｇｅ２...
Page 3 MODEL-KEF-14601 Installation ９６° 6.8’’ 　　　ｌｅｆｔ　　　ＲｉｇｈｔＨｏｔ　　ｗａｔｅｒＣｏｌｄ　　ｗａｔｅｒ 1.4’’ 　　　Ｃｌｏｓｅ　　　Ｏｐｅｎ 3 ½’’ Make sure the installation holes are in the correct size.

Kef-14601