Technical Specifications - Siemens SIMATIC S7-1500/ET 200MP Manual

Technical specifications

Technical specifications of AI 16xU BA
The following table shows the technical specifications as of 09/2020. You can find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/ps/td).
Enter the article number or the short designation of the module on the website.
Article number
General information
Product type designation
HW functional status
Firmware version
• FW update possible
Product function
• I&M data
• Prioritized startup
Engineering with
• STEP 7 TIA Portal configurable/integrated
from version
• STEP 7 configurable/integrated from ver-
sion
• PROFIBUS from GSD version/GSD revision
• PROFINET from GSD version/GSD revision
Operating mode
• Oversampling
• MSI
CiR - Configuration in RUN
Reparameterization possible in RUN
Calibration possible in RUN
Power
Power available from the backplane bus
Power loss
Power loss, typ.
26
6ES7531-7LH00-0AB0
AI 16xU BA
FS01
V1.0.0
Yes
Yes; I&M0 to I&M3
No
V16 with HSP 312 / V17
V5.5 SP3 / -
V1.0 / V5.1
V2.3 / -
No
Yes
Yes
No
0.85 W
0.75 W
Analog input module AI 16xU BA (6ES7531-7LH00-0AB0)
Equipment Manual, 09/2020, A5E47052556-AA
6