Wiring - Siemens SIMATIC S7-1500/ET 200MP Manual

Wiring

This section contains the block diagram of the module and outlines various connection
options.
You can find information on wiring the front connector, creating a cable shield, etc. in the
Wiring section of the system manual S7-1500/ET 200MP
(https://support.industry.siemens.com/cs/ww/en/view/59191792).
Note
Do not insert the potential jumpers supplied with the front connector.
Abbreviations used
Meaning of the abbreviations used in the following figures:
U +/U
n
M
ANA
Infeed element
The module does not require supply voltage through the infeed element. The infeed element
is inserted on the front connector and serves solely for shielding.
Figure 3-1
10
- Voltage input channel n
n
Reference potential of the analog circuit
Infeed element
Analog input module AI 16xU BA (6ES7531-7LH00-0AB0)
Equipment Manual, 09/2020, A5E47052556-AA
3