Siemens SIMATIC S7-1500/ET 200MP Manual page 34

Hide thumbs Also See for SIMATIC S7-1500/ET 200MP:

Table of Contents

Operation of the module behind a PROFIBUS DP interface module

If the module is operated behind a PROFIBUS DP interface module, the parameter data

records 0 and 1 are not read back. You obtain the diagnostics data records 0 and 1 with the

read back parameter data records 0 and 1. You can find additional information in the

Interrupts section of the manual for the PROFIBUS DP interface module on the Internet

(http://support.automation.siemens.com/WW/view/en/78324181).

Assignment of data record and channel

For the configuration with 1 x 16-channel, the parameters are located in data records 0 to 15

and are assigned as follows:

• Data record 0 for channel 0

• Data record 1 for channel 1

• ...

• Data record 14 for channel 14

• Data record 15 for channel 15

Analog input module AI 16xU BA (6ES7531-7LH00-0AB0)

Equipment Manual, 09/2020, A5E47052556-AA

B.1 Parameter assignment and structure of the parameter data records

Parameter data records

Table of Contents