Gs748Ts Front And Back Panel Configuration; Front And Back Panels - NETGEAR ProSafe GS700TS Hardware Installation Manual

GS700TS Series Hardware Installation Guide
Figure 2-2 illustrates the NETGEAR GS724TS Smart Switch back panel:
Figure 2-2
The back panel contains the following:
• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for
accommodating the supplied power cord.
• Two 19 pin HX stacking ports for full-duplex stacking linking.

GS748TS Front and Back Panel Configuration

The NETGEAR GS748TS Smart Switch is a 48-Port 10/100/1000 + 4-Port SFP Combo port smart
stackable switch, with each RJ45 ports capable of sensing the line speed and negotiating the
operation duplex mode with the link partner automatically.

Front and Back Panels

Figure 2-3 illustrates the NETGEAR GS748TS Smart Switch front panel:
Figure 2-3
The front panel contains the following:
• 48 RJ-45 connectors for 10BASE-T, 100BASE-T and 1000BASE-T.
• Four Gigabit Interface Converter (SFP) slots for SFP modules.
• Reset button to restart the device.
• Recessed default reset button to restore the device back to the factory defaults.
2-2
v1.0, November 2006
Physical Description