Package Contents - NETGEAR ProSafe GS700TS Hardware Installation Manual

GS700TS Series Hardware Installation Guide
• Master-Backup – Runs as a slave unit and monitors the operation of the stack master. If the
master unit fails, you must select the Master-Backup manually to assume the Stack-master
role. If a Master-Backup becomes the Master Unit, another Master-Backup will need to be
selected manually. One of the Slave units will not automatically become a Master-Backup.
• Slave – Runs a slave version of the Switching Algorithm, which allows the applications
running on the master unit to control the resources of the slave unit.

Package Contents

Figure 1-1 shows the package contents of the NETGEAR Smart Switch.
Figure 1-1
Verify that the package contains the following:
• NETGEAR Smart Switch
• Rubber footpads for tabletop installation
• Power cord
• Rack-mount kit for installing the switch in a 19-inch rack
• Installation guide
• Smart Switch Resource CD with Smart Wizard Discovery and User's manual
• Warranty/Support Information Card
1-4
v1.0, November 2006
Introduction