Step 6: Installing Device As Stack Master - NETGEAR ProSafe GS700TS Hardware Installation Manual

GS700TS Series Hardware Installation Guide
To install an SFP GBIC module:
Insert the SFP module into the SFP module bay. Press firmly to ensure the module seats into the
connector.
Figure 4-3

Step 6: Installing Device as Stack Master

The device can operate as part of a stack.
The HX stacking ports on the back of the device are used for connecting the devices in a
stack.There are two stacking topologies supported by the device, the Ring topology or Chain
topology as shown in Figure 4-4.
Installation 4-5
v1.0, November 2006