Chapter 1: Introduction; Overview - NETGEAR ProSafe GS716T Operating Instructions Manual

CHAPTER 1: INTRODUCTION

Congratulations on your purchase of the NETGEAR ProSafe GS716T Gigabit Smart Switch! Your NETGEAR Switch is a state-of-the-art, high-
performance, IEEE-compliant network solution designed for users who require a large number of ports and want the power of Gigabit connectivity
to eliminate bottlenecks, boost performance, and increase productivity. There are 16 twisted-paired ports with 2 SFP GBIC slots on the front panel
of the switch that support non-stop 10/100/1000 networks. To simplify installation, the switch is shipped ready for use out of the box.
This chapter serves as the introduction for using your NETGEAR ProSafe GS716T Gigabit Smart Switch and provides the following information:
•

Overview

•
Switch Features
•
Package contents
Overview
Your NETGEAR ProSafe GS716T Gigabit Smart Switch provides 16 twisted-paired ports with 2 built-in Small Form Factor (SFP) GBIC slots that
support non-stop 10/100/1000 fiber networks. Using these Gigabit slots, you can create high-speed connections to a server or network backbone.
For example, you can:
•
Connect switches to each other with high-speed links
•
Link to high-speed servers
•
Provide 10/100/1000 copper and fiber connectivity
Your NETGEAR ProSafe GS716T Gigabit Smart Switch also provides the benefit of administrative management with a complete package of
features for the observation, configuration, and control of your network. With a Web-based Graphical User Interface (GUI), the switch's many
capabilities can be viewed and used in a simple and intuitive manner. There is also an easy to use switch management utility that runs on a PC.
The switch's management features include configuration for port and switch information, VLAN for traffic control, port trunking for increased
bandwidth, and Class of Service (CoS) for traffic prioritization. These features and more will allow you to better understand and control your
network.
Your NETGEAR ProSafe GS716T Gigabit Smart Switch can be free-standing, or rack mounted in a wiring closet or equipment room. It is IEEE-
compliant and offers low latency for high-speed networking. It includes 16 auto-sensing 10/100/1000 Ethernet ports with 2 SFP GBIC slots. All ports
can automatically negotiate to the highest speed. This capability makes the switch ideal for environments that have a mix of Ethernet, Fast Ethernet,
or Gigabit Ethernet devices. In addition, all 10/100/1000 Mbps ports operate in half- or full-duplex mode, increasing the maximum bandwidth of
each connection up to either 20 Mbps, 200 Mbps, or 2000 Mbps, respectively. The maximum segment length is 328 feet (100 meters) over
Category 5 unshielded twisted-pair (UTP) cable.
Page 6 of 20