Features - NETGEAR ProSafe FSM7326P Hardware Installation Manual

segment length is 328 feet (100 meters) over Category 5 unshielded twisted-pair (UTP) cable.

Features

The following list identifies the key features of the NETGEAR Model FSM7326P Managed Power over
Ethernet Switch:
•
Twenty four 10/100 Mbps auto sensing Fast Ethernet TP ports
•
Two SFP/twisted pair combo ports to allow fiber connection
•
Full compatibility with IEEE standards:
o IEEE 802.3i, (10BASE-T)
o IEEE 802.3u (100BASE-TX)
o IEEE 802.3ab (1000BASE-T)
o IEEE 802.3z (1000BASE-X)
o IEEE 802.3x (full-duplex flow control)
o IEEE 802.3af (Power over Ethernet)
•
Full Layer 2 switch management including:
o SNMP V3
o RMON (groups 1,2,3 and 9)
o IEEE 802.1Q (up to 512 Static VLAN groups)
o IEEE 802.1D (Spanning Tree)
o IEEE 802.1w (rapid spanning tree)
o IEEE 802.1s (multiple spanning tree)
o IEEE 802.3ad Link Aggregation (LACP)
o IEEE 802.1x (Port Authentication)
o Port Mirroring
o DHCP/BootP Client for automatic IP address setup
o Configuration file export/import
o TFTP firmware upgrade
•
Layer 3 features:
o RIP I, II
o OSPF V2
o IP Routing
•
Security to better safeguard your network:
o Password Access Control
o IP Access Control List
o RADIUS Client Support
•
Traffic management to better manage traffic flows through your switch:
o IEEE 802.1p (Class of Service)
o DiffServ traffic prioritization
o Broadcast Storm Control
o IGMP snooping
o Half-duplex back-pressure control
o Full-duplex IEEE 802.3x pause frame flow control
Page 6 of 23