Appendix A: Technical Specifications - NETGEAR ProSafe FSM7326P Hardware Installation Manual

APPENDIX A: TECHNICAL SPECIFICATIONS

This appendix provides technical specifications for the NETGEAR Model FSM7326P Managed Power over
Ethernet Switch.
Network Protocol and Standards Compatibility
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE-SX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x flow control
IEEE 802.3af Power over Ethernet
Management
IEEE 802.1Q Static VLAN (Up to 4k)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation (LACP)
IEEE 802.1x (Port Authentication)
IGMP v1, v2 Snooping Support
Port Mirroring support
SNMP v3
RFC1757 RMON 1 groups 1,2,3, and 9
RFC1213 MIB II
RFC1643 Ethernet Interface MIB
RFC1493 Bridge MIB
RFC2131 DHCP client (& BootP)
RFC2138 RADIUS client
Broadcast storm control
Private Enterprise MIB
Configuration file upload, download (TFTP)
Interface
24 RJ-45 connectors for 10BASE-T and 100BASE-TX (Auto Uplink™ on all ports)
2 RJ45 connectors for 1000Base-T (Auto Uplink™ on all ports)
2 Gigabit Interface Converter (SFP) slots for SFP modules
RS-232 Console Port
LEDs
Per port (10/100): Link, Speed/Activity, PoE
Per port (gigabit): Link, Speed, Activity
Per device: Power, Max PoE, RPS
Performance Specifications
Forwarding modes: Store-and-forward
Bandwidth: 8.8 Gbps
Network latency: Less than 80 microseconds for 64-byte frames in store-and-forward mode for 10 Mbps to
100 Mbps transmission
Page 19 of 23