Led Descriptions; Console Port; Table 2-1. Front Panel Leds - NETGEAR ProSafe FSM7326P Hardware Installation Manual

LED Descriptions

The front panel of the NETGEAR Model FSM7326P Managed Power over Ethernet Switch has LEDs that
provide a quick and accurate display of port speed, activity, PoE status, and duplex mode. Table 2-1
summarizes the LEDs on the switch and Gigabit Ethernet module.

Table 2-1. Front Panel LEDs

Label
Power
RPS
Max PoE
10/100M & Fast Ports
Link
Speed/Act
PoE
10/100/1000 Combo Ports
Link
Speed/Act
1000M/Act

Console Port

Your NETGEAR Model FSM7326P Managed Power over Ethernet Switch has a console port on the front
panel. This port is labeled Console and is required for initial management configuration of the switch.
It also lets you manage the switch using a directly connected VT-100 terminal, personal computer (PC),
Apple Macintosh, or UNIX workstation. The terminal, computer, or workstation connects to the console port
using the null-modem cable supplied with your switch.
Color Activity
Green On
Off
Amber Blinking
Green On
Off
Amber On
Off
Green On
Amber On
Green On
Green Blinking
Amber On
Amber Blinking
Green On
Green On
Amber On
Green On
Green Blinking
Amber On
Amber Blinking
Green On
Green Blinking
Page 11 of 23
Description
Power supply present and operating normally
Power supply is not present
The device is performing boot up diagnostics
RPS is detected
RPS is either not present or is not functional
Power supply has reached its maximum load, and no
more powered devices may be attached to the
switch.
More PoE powered devices may be attached to the
switch.
Link in full duplex
Link in half duplex
Link in 100Mbps
Activity, transmitting or receiving packet
Link in 10Mbps
Activity, transmitting or receiving packet
Power is being provided to a powered device through
this port
Link in full duplex
Link in half duplex
Link in 100Mbps
Activity, transmitting or receiving packet
Link in 10Mbps
Activity, transmitting or receiving packet
Link in 1000Mbps
Activity, transmitting or receiving packet