NETGEAR ProSafe FSM7326P Hardware Installation Manual page 12

The console port is configured to use the following settings:
•
Baud rate: 9,600 bps
•
Data bits: 8
•
Parity: none
•
Stop bit: 1
•
Flow control: none
These settings appear below the connector on the switch front panel.
In addition to using the console port, you can manage the switch using a Web browser or a Simple Network
Management Protocol (SNMP) management program.
For more information about console-port connections, see
Switch (initial configuration). For more information about managing the switch, see the User Guide located
on the CD-ROM.
Connecting to the Console Port to Manage the
Page 12 of 23