Pre-Ride Helmet Inspection; Checking The Exterior; Checking The Chinstrap - Sena Outstar S User Manual

Bluetooth helmet

Hide thumbs Also See for Outstar S:

Table of Contents

2 WEARIng THE HELMET

2.11 Pre-Ride Helmet Inspection

Check the helmet regularly for damage. Small, superficial scratches will

not impair the helmet's protective qualities. In the case of more serious

damage (cracks, dents, flaking and cracking paint, etc.), the helmet

should no longer be used.

1. Ensure that the chinstrap is properly routed under your chin.

2. To test the chinstrap tension, slip your index finger under the

chinstrap and pull. If the chinstrap is loose under the chin, it needs to

be tightened. If the chinstrap loosens when you pull on it, the helmet

is not properly fitted. Undo the chinstrap completely and try fastening

it again, then repeat the test.

3. If you are unable to fasten the chinstrap so that it fits firmly against

the chin, check that your helmet is still the right size for you.

Note: Repeat the test after each adjustment.

CAUTION: Never ride with the chinstrap unfastened or incorrectly

adjusted. The chinstrap should fit correctly and should not become

loose when pulled. The fastener is not correctly closed if the chinstrap

becomes loose when pulled.

OUTSTAR S Bluetooth

Helmet | 14

Table of Contents