Removing The Inner Pad; Installing The Inner Pad - Sena Outstar S User Manual

2 WEARIng THE HELMET

2.7 Removing the Inner Pad

1. Unsnap the two rear buttons of the inner pad.
2. Lift the pad upward and place your fingers under the plastic plate in
the front section. Then, remove the plate by pulling it away from the
front of the helmet.

2.8 Installing the Inner Pad

1. Align and install the plastic plate on the four sleeves of the front
section.
2. Snap the two rear buttons of the inner pad into place.
OUTSTAR S Bluetooth
®
Helmet | 12