Pre-Ride Helmet Inspection; Checking The Exterior; Checking The Chinstrap - Sena CAVALRY LITE User Manual

General
Information
Product
Details
Wearing
the Helmet
Pre-Ride
Helmet
Inspection
accessory
Installation:
Ear Plates
accessory
Installation:
Ear Pads
1. About the
CAVALRY LIte
bLuetooth hALf
heLmet

1.4 Pre-Ride Helmet Inspection

1.4.1 Checking the Exterior

Check the helmet regularly for damage.
Small, superficial scratches will not impair the
helmet's protective qualities. In the case of
more serious damage (cracks, dents, flaking
and cracking paint, etc.), the helmet should no
longer be used.
Exterior Shell
Removable Visor
Chinstrap

1.4.2 Checking the Chinstrap

1. Ensure that the chinstrap is properly routed
under your chin.
2. To test chinstrap tension, slip your index
finger under the chinstrap and pull. If the
chinstrap is loose under the chin, it needs to
be tightened. If the chinstrap loosens when
you pull on it, the helmet is not properly
fitted. Undo the chinstrap completely and
try fastening it again, then repeat the test.
3. If you are unable to fasten the chinstrap so
that it fits firmly against the chin, check that
your helmet is still the right size for you.
Note: Repeat the test after each
adjustment.
Sena Cavalry Lite Bluetooth
mENU
Half Helmet | 11
®