Table 7-2. Abbreviations Used If Filter Type Is Ip; Table 7-3. Abbreviations Used If Filter Type Is Gen - NETGEAR RT311 Reference Manual

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
Table 7-1. Abbreviations Used in Menu 21.1 - Filter Rules Summary (continued)
Abbreviation Description
m Refers to Action Matched. F means to forward the packet, D means to drop the
packet, and N means to check the next rule.
n Refers to Action Not Matched. F means to forward the packet, D means to drop the
packet, and N means to check the next rule.
For more information about filter rules, refer to
If the filter type is IP (TCP/IP), the abbreviations listed in
Table 7-2. Abbreviations Used if Filter Type Is IP
Abbreviation Description
Pr Protocol
SA Source Address
SP Source Port number
DA Destination Address
If the filter type is GEN (generic), the abbreviations listed in
Table 7-3. Abbreviations Used if Filter Type Is GEN
Abbreviation Description
Off Offset
Len Length
To configure a specific filter rule, select the number of the filter rule (1–6) that you want to
configure and press [Enter] to display Menu 21.1.1 - TCP/IP Filter Rule
7-4
"Configuring a Filter
Table 7-2 are used.
Table 7-3
Rule," on page 7-6.
are used.
(Figure 7-3).
Configuring Filters