Advertisement
INSPECTION DETAILS - G. RIGHT FRONT
POWER WINDOW AND DOOR LOCKS
a) With the "ENGINE" switch in the "IG-ON" mode, operate
the power window switch. Check that the power window
up and down operation is smooth.
b) Check operation of the power door lock switch.
c) With the doors closed, check that the power window can
be fully operated after the "ENGINE" switch has been
switched to the ACCESSORY or OFF mode.
NOTE:
This feature is canceled after 45 seconds or if either front
door is opened.
DRIVING POSITION MEMORY SYSTEM*
a) With the "ENGINE" switch in the "IG-ON" mode and the
shift lever in the "P" position, check the operation:
1. Adjust the passenger's seat to the desired position.
2. While pressing the "SET" button, hold down button
"1," "2" or "3" until a beep is heard.
3. Check all buttons (1, 2 and 3) to make sure that all
memorized settings operate correctly.
SEAT BELT
Check seat belt operation.
a) Check that the belt extends and retracts smoothly.
b) Check that the belt is not twisted.
c) Check that the buckle locks securely and releases
smoothly.
d) Check that the adjustable seat belt anchor operates
properly and that it securely locks in position.
36
* If equipped
IS200t/IS300/IS350
Advertisement
