Advertisement
INSPECTION DETAILS - A. ENGINE COMPARTMENT
ENGINE HOOD RELEASE LEVER
Use the engine hood release lever to check that the latch
operates properly. Ensure that the engine hood opens and
closes smoothly.
DCC FUSE INSTALLATION
Refer to TSIB.
ENGINE OIL LEVEL (ENGINE NOT
RUNNING)
a) Remove the engine oil level dipstick and wipe it clean.
Reinsert the dipstick and pull it out to check the oil level.
The level should be between the two marks.
1
Low
2
Full
3
Excessive
b) Check the oil for dirt or impurities.
NOTE:
If the oil level is low, add specified engine oil and check
for oil leaks.
2
IS200t/IS300/IS350
Advertisement
