Advertisement
INSPECTION DETAILS - C. LEFT FRONT
DRIVING POSITION MEMORY SYSTEM*
a) With the "ENGINE" switch in the "IG-ON" mode and the
shift lever in the "P" position, check the operation:
1. Adjust the driver's seat and outside rearview mirrors
to the desired positions.
2. While pressing the "SET" button, press button "1," "2"
or "3" until a beep is heard.
3. Check all buttons (1, 2 and 3) to make sure that all
memorized settings operate correctly.
b) With the shift lever in the "P" position, close the driver's
door and turn the "ENGINE" switch to "IG-ON" mode.
1. Register a driving position to the button "1," "2" or "3."
2. Do not carry more than one key (including a card
key*) when registering. While pressing button "1,"
"2" or "3," press the driver's door lock switch (either
lock or unlock switch) until a signal beeps.
3. Unlock the driver's door using the entry function or
wireless remote control, open the driver's door, and
check that the stored driving position is recalled.
SEAT ADJUSTMENT
Check seat adjustment operation.
a) Power seat adjustment
1
Seat position adjustment
2
Seatback angle adjustment
3
Seat cushion angle adjustment (front)
4
Seat cushion angle adjustment (rear)
5
Lumbar support adjustment*
13
* If equipped
IS200t/IS300/IS350
Advertisement
