Figure 5-9. Add Custom Service Menu - NETGEAR FR114P Reference Manual

Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
To define a new service, first you must determine which port number or range of numbers is used
by the application. This information can usually be determined by contacting the publisher of the
application or from user groups of newsgroups. When you have the port number information, go
the the Services menu and click on the Add Custom Service button. The Add Services menu will
appear, as shown in Figure
Figure 5-9. Add Custom Service menu
To add a service,
Enter a descriptive name for the service so that you will remember what it is.
1.
Select whether the service uses TCP or UDP as its transport protocol.
2.
If you can't determine which is used, select both.
Enter the lowest port number used by the service.
3.
Enter the highest port number used by the service.
4.
If the service only uses a single port number, enter the same number in both fields.
Click Apply.
5.
The new service will now appear in the Services menu, and in the Service name selection box in
the Rules menu.
Security
5-9:
5-15