Table of Contents
Advertisement
Add a Custom Port Forwarding Service
To add a custom service:
1.
Find out which port number or range of numbers the application uses.
You can usually find this information by contacting the publisher of the application or user groups or
news groups.
2.
Launch a web browser from a computer or mobile device that is connected to your Orbi network.
3.
Enter orbilogin.com.
A login window opens.
4.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
5.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering page displays.
6.
Leave the Port Forwarding radio button selected as the service type.
7.
Click the Add Custom Service button.
The Ports - Custom Services page displays.
8.
In the Service Name field, enter a descriptive name.
9.
In the Protocol menu, select the protocol.
If you are unsure, select TCP/UDP.
10.
In the External Port range field, enter the port numbers.
11.
Specify the internal ports by one of these methods:
•
Leave the Use the same port range for Internal port check box selected.
•
Type the port numbers in the Internal port range field.
12.
Type the IP address in the Internal IP address fields or select the radio button for an attached device
listed in the table.
13.
Click the Apply button.
The service is now in the list on the Port Forwarding/Port Triggering page.
Edit a Port Forwarding Service
To edit a port forwarding entry:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2.
Enter orbilogin.com.
Orbi Pro
Customize Internet Traffic Rules for Ports
92
Advertisement
Table of Contents
