Figure 9-3. Static Routes Summary Table; Figure 9-4. Static Route Entry And Edit Menu - NETGEAR FR114P Reference Manual

Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the
Static Routes menu, shown in
Figure 9-3. Static Routes Summary Table
To add or edit a Static Route, click the Add or Edit button to open the Edit Menu, shown in
Figure 9-4.
Figure 9-4. Static Route Entry and Edit Menu
Type a route name for this static route in the Route Name box under the table.
3.
(This is for identification purpose only.)
Select Active to make this route effective.
4.
Select Private if you want to limit access to the LAN only. The static route will not be reported
5.
in RIP.
Type the Destination IP Address of the final destination network.
6.
Type the IP Subnet Mask for this destination network.
7.
If the destination is a single host, type 255.255.255.255.
Type the Gateway IP Address that will be used to reach the destination network.
8.
Advanced Configuration
Figure 9-3.
9-7