Vantrue Mirror 3 User Manual page 25

4.13 Brightness Adjustment
Manual/Auto LCD brightness adjustment: Swipe up and
down on the right side of the screen with your finger to
adjust the brightness of the screen. Or enter the Menu
settings and adjust the screen brightness to high/medi-
um/low mode as needed.
4.14 Reversing settings
Under the guidance of the installation video (www. vantrue.
net) provided by us, after connecting the rear lens to the
reversing light, the reversing assist function will be automati-
cally activated when reversing.
Reverse Image: This function is disabled by default. When
your rear camera is installed upside down, the picture will
be inverted by 180° and the picture will be in mirror mode.
After this mode is enabled, the picture will be in the
original image mode.
Reverse Assist Lines: It is on by default. When the rear light is
connected to the rear camera, the reverse guideline will
be displayed automatically when reversing.
Reverse Preview Settings: According to your car model,
adjust up and down the reverse assist line display, click
"back" to confirm and save the settings.
The default setting of the reverse image is on, and the
reversing aid line is turned on by default (the front and rear
direction is to adjust the extension or shortening of the
reversing aid line, the size direction is to adjust its width, left
and right and up and down are to adjust the direction of
the reversing aid line.
- 21 -
N E N N E N E E