Vantrue Mirror 3 User Manual page 24

3-channel mirror dash cam
Hide thumbs Also See for Mirror 3:
Table of Contents

Advertisement

Available languages

Available languages

will generate a time-lapse video lasting just 16 minutes
(8x60x60/30/60). This Eco Mode is recommended for
storage cards with a smaller capacity.
EN
EN
[Real Recording Time (Sec) = Time Lapse Recording Time
(Sec) x Video Frame Rate FPS / Time Lapse Option FPS]
Note:
1.
After manually turning off the dash cam, it will not be able
to enter the low framerate mode.
2.
After turning on time-lapse, the low frame rate mode will
automatically exit.
4.12.3 Motion Detection
There are three levels of motion detection sensitivity:
High/Medium /Low and the default is off. Select the record-
ing time of parking, there are 4 hours, 8 hours, 12 hours, 24
hours or unlimited to choose from. Default is unlimited.
When the motion Detection is turned on, then the P icon
appears in the center of the screen, and the screen will turn
off after 3 seconds. M3 comes with a pre-recording function.
When the motion detection motion is over, the camera will
load the first 5 seconds of motion detection into the motion
detection video, and save the motion detection file as 30
seconds.
Note:
1.
After manually turning off the dash cam, it will not enter
the motion detection mode.
Motion detection will be disabled automatically after the
2.
normal time-lapse recording is enabled.
North 60km/h
- 20 -
13:32
9-1
Fri

Advertisement

Table of Contents
loading

Table of Contents