7.3
Maintenance
To access the Maintenance screen, click on the Maintenance tab, the screen will display as below:
The Reset button can be used to reset the unit.
The Load Default button can be used to reload the default parameters for the unit.
The Retrain button can be used to re-train the port's ADSL line link (default train rate is 640/8032 Kbps).
Loopback Test:
FER (Frame Error Rate): displays the frame error rate as a percentage.
TxFrame:
RxFrame:
The Refresh button refreshes the above statistics.
NCT-1000/NCT-1020 User Guide
YML836 Rev2
you can click Start to perform an ATM OAM F5 loopback or click Stop to stop the
loopback test.
counts the number of frames transmitted.
counts the number of frames received.
83