Table of Contents
Advertisement
Quick Links
Chronomix S - Imit Control System s.r.l.
The product model and code (6 digits) are printed on the sticker on the outside or the inside of the battery compartment
cover. The manual may not be available in the selected language.
Chronomix S
COD. 578180
PRODUCT DESCRIPTION
This device is a chronothermostat with electronic temperature control and daily electromechanical clock.
Produced in accordance with the applicable EC directives, according to the standards EN 60730-2-9, EN
60730-2-7, it is entirely manufactured in Italy.
Technical speci�cations
Power supply 2x1.5V LR6 Alkaline Batteries (Type AA)
Battery life > 1 year
1 of 9
https://manimit.it/en/chronomix-s-2/
1/27/2022, 11:35 AM
Advertisement
Table of Contents
Related Manuals for Imit Chronomix S
Summary of Contents for Imit Chronomix S
- Page 1 Chronomix S - Imit Control System s.r.l. https://manimit.it/en/chronomix-s-2/ The product model and code (6 digits) are printed on the sticker on the outside or the inside of the battery compartment cover. The manual may not be available in the selected language.
-
Page 2: Installation
Chronomix S - Imit Control System s.r.l. https://manimit.it/en/chronomix-s-2/ Maximum capacity of the contacts 5A(1A) 250VAC Type of action 1B Class ErP I (+1%) - 811/2013 (regolazione ON/OFF) - ErP IV (+2%) - 811/2013 (regolazione TPI) Temperature probe NTC 100KΩ@25°C Temperature differential on regulation regolazione ON/OFF: 0,5K... - Page 3 Chronomix S - Imit Control System s.r.l. https://manimit.it/en/chronomix-s-2/ FIG. 2 Remove the screw and detach the terminal cover (Fig.3 A). Insert the cables through the opening on the bottom (Fig.3 C). Attach the base to the wall or on the �ush mounted box with screws, using the relevant holes (Fig.3 B). To facilitate the electrical connections, remove the 3-way terminal block (Fig.3 D), exerting slight outward pressure on the...
- Page 4 Chronomix S - Imit Control System s.r.l. https://manimit.it/en/chronomix-s-2/ FIG. 4 After connecting the cables, insert the terminal block into place, pressing it gently until the lever clicks. Replace the terminal cover, screwing it back onto the base (Fig.3 A). Select the temperature regulation mode, as described in the chapter “REGULATION TYPE”.
-
Page 5: Battery Replacement
Chronomix S - Imit Control System s.r.l. https://manimit.it/en/chronomix-s-2/ FIG. 7 Press lightly to facilitate connection of the two parts. BATTERY REPLACEMENT FIG. 1 Replace the batteries when the red light �ashes (Fig.1 G) . 5 of 9 1/27/2022, 11:35 AM... - Page 6 Chronomix S - Imit Control System s.r.l. https://manimit.it/en/chronomix-s-2/ Using a screwdriver open the device via the side hooks on the left and then remove the front, separating it from the base (Fig.2) and replace the batteries as indicated (Fig.5). FIG. 2 FIG.
-
Page 7: Clock Adjustment
Chronomix S - Imit Control System s.r.l. https://manimit.it/en/chronomix-s-2/ COMMANDS LEGEND (Fig.1) A = Reduced temperature setting knob B = Comfort temperature setting knob C = Operating mode selector D = Timer index E = Programmer clock F = Position of selectors for Comfort/Reduced temperature G = Light for low battery warning and alarms... -
Page 8: Automatic Operation
Chronomix S - Imit Control System s.r.l. https://manimit.it/en/chronomix-s-2/ Set the desired temperature: position the desired value under the reference indicator by turning the Comfort knob (Fig.1 B). AUTOMATIC OPERATION The temperature regulated in the environment (set with the Comfort or Reduced knobs) depends on the settings chosen on the clock and changes automatically. -
Page 9: Problem Solving
Chronomix S - Imit Control System s.r.l. https://manimit.it/en/chronomix-s-2/ PROBLEM SOLVING Problem The red light of the device (Fig.1 G) is activated to indicate: Possible cause • with 2 slow �ashes: batteries almost �at. • with 2 quick �ashes: batteries �at.
Need help?
Do you have a question about the Chronomix S and is the answer not in the manual?
Questions and answers