RF Section
Repair Procedures
This section contains information
on:
•
The module exchange program
•
Removal/installation procedures for the RF assemblies
MODULE EXCHANGE PROGRAM
The
A8 through A18, A63, AT1, and AT3 assemblies are not field repairable. Of these, the A8, A9, A13,
A14, A16, A17, and A18
assemblies are
available through the module
exchange program.
The programs
lets you
exchange
a
defective module
for
a
fully tested and guaranteed restored-
exchange module
at
a
reduced price (contingent on the return of the defective module).
Figure
H-22
illustrates
the module exchange program. When you locate
a
defective module:
1.
Order
a
replacement through
the
nearest Hewlett-Packard sales
office
(see Table H-2).
A
restored
exchange module
will be
sent immediately, directly from
a
customer service replacement parts
center.
2.
When
you receive the
exchange
module,
return
the defective module
in
the same special carton
in
which the exchange module arrived.
DO NOT
return the
defective module
until
you receive the
exchange module.
If
you
do not wish to return the defective module
to
Hewlett-Packard, or
if
you
are
ordering
a
module
for spare parts stock, etc, order
a
new module.
HP 8340B/41B
RF
Section Repair Procedures
H-35