REMOVAL OF THE BALLAST HOLD PLATE, THE BALLAST SHIELD CASE TOP, THE
BALLAST SHIELD CASE BOTTOM
1. Remove the Ballast C.B.A. Refer to Steps 1~7 in "REMOVAL OF THE BALLAST C.B.A. AND THE TV/TUNER UNIT FROM THE
CABINET."
2. Remove the Ballast Hold Plate by removing the 2 Screws (452).
3. Release the Connector Cable P1301, P1302, and P1305 from the Clamper.
4. Remove the Ballast Shield Case Top.
5. Remove the Ballast Shield Case Bottom by removing the 2 Screws (411), and releasing the 3 Spacers.
Ballast Hold Plate
Ballast Shield Case Top
P1305
P1301
411
452
Spacer
Fig. D7
411
P1302
Spacer
Ballast Shield
Case Bottom
452
Spacer