3. 1) Remove the 5 Screws (402) and remove Clamper-1.
2) Remove the 2 Screws (451) on the Lamp Socket.
3) Disconnect the Lamp Connector.
4) Avoiding the Ballast C.B.A., disconnect Connector P1306 (Thermal Fuse Unit) inside of the Ballast C.B.A.
5) Remove the Clamper from the Ballast C.B.A.
Replacement Note of Ballast C.B.A.:
These parts will be necessary when replacing the Ballast C.B.A. Set aside, and keep and re-use.
•
The Clamper on Ballast C.B.A.
•
The Thermal Fuse Unit
Clamper-1
402
451
Clamper
Lamp Connector
402
P1306
Fig. D1-3
Lamp Socket
Note:
Do not remove the
Thermal Fuse Unit.
Ballast C.B.A.
Clamper-1
451