After servicing, make sure that all wires, leads, and clampers are placed in their original position. It is important for the best
operation of the unit.
Note: Use extreme care especially for the following.
P2303 (From Thermistor 1 C.B.A.)
P2902
(From Fan 1)
P1306 (From Thermal Fuse Unit)
Thermistor 2
C.B.A.
P2901
P2501
(From Main
(From Main
C.B.A.)
C.B.A.)
Clamper
Clamper
Fig. 9-2
P2904
P2502 (From
(From
Cover Switch
Fan 3)
C.B.A.)
P2304 (From
Thermistor 2
P2903
C.B.A.)
(From Fan 2)
Ballast C.B.A.
Lamp Cable
Lamp Sockets