Panasonic PT-43LCX64 Service Manual page 45

4. 1) Disconnect Connector P2901and release them from the clamper.
2) Disconnect Connector P2501 (20-pin Cable) and release it from the clamper.
CAUTION: Take extreme care not to damage the 20-pin Cable when disconnecting.
5. 1) Disconnect Connectors P3502, P5501, P4503, P6305 and release them from the clampers.
2) Remove the Screw (452) on the GND Plate A.
3) Remove the Screw (401) on the TV/Tuner Ass'y.
4) Lift up and slide the TV/Tuner Ass'y by releasing the 7 Guide Tabs.
CAUTION: Do not slide the TV/Tuner Unit before removing the 20-pin Cable.
Replacement Note of TV/Tuner Unit:
These parts will be necessary when replacing the TV/Tuner Unit. Set aside, and keep and re-use.
• 20-pin Cable
GND Plate A
CAUTION:
20-pin Cable
P5501
P6305
Clamper
P3502
P4503
Clampers
Slot
holes
holes
P2501 P2901
452
TV/Tuner Ass'y
401
Fig. D1-4
TV/Tuner Ass'y
Guide Tabs (X5)
Guide Tabs (X2)
<Bottom View of TV/Tuner Ass'y>
Fig. D1-5
452
Rear