Panasonic PT-43LCX64 Service Manual page 62

5. (PT-43LCX64)
Remove the 2 Screen Plate H and 2 Screen Plate V by removing 26 Screws (401), and remove the Fresnel Lens and the Lenticular
Screen.
(PT-50LCX64)
Remove the 2 Screen Plate H and 2 Screen Plate V by removing 30 Screws (401), and remove the Fresnel Lens and the Lenticular
Screen.
Screen Unit
Serial No.
Label
Serial No. Label
of Lenticular Screen
Reassembly Note:
Install them so that Serial No. Labels are on the each outside as shown above.
Replacement Note for Screen Unit:
The Screen Unit is supplied as a unit, or the individual parts (Fresnel Lens, Lenticular Screen) in the Screen Unit are also supplied.
When replacing the Fresnel Lens and the Lenticular Screen, take care that dust, etc., does not adhere between the Fresnel Lens
and the Lenticular Screen. Due to this risk, it is strongly recommended to replace the Screen Unit as a unit.
Escutcheon
Screen
Plate V
Front
Lenticular
Screen
Screen
Plate H
Serial No. Label
of Fresnel Lens
Fig. D4-5-1
Screen
Plate H
Fresnel
Lens
Screen
Plate V
401
401