Supermicro AS-2014CS-TR User Manual page 86

A+ Server AS -2014CS-TR User's Manual
•
L2 Data Cache (Size/Method)
•
L3 Cache per Scoket (Size/Method)
NB Configuration
Determinism Control
Use this setting to configure the Determinism Slider. Options include Manual and Auto.
cTDP Control
Use this setting to configure the cTDP Control. Options include Auto and Manual.
IOMMU
Use this setting to enable or disable IOMMU. Options include Disabled, Enabled, and Auto.
APBDIS
Use this setting to . Options include 0, 1, and Auto.
DF Cstates
Options include Disabled, Enabled, and Auto.
Preferred IO
Options include Manual and Auto.
EDC Control
Electrical Design Current (EDC) is the total current capacity in Amps that can be supplied to
the socket. Options include Manual and Auto.
Memory Configuration
Memory Clock
This setting allows you to select different memory clock speed. Options include Auto, 2667
MHz, 2933 MHz, and 3200 MHz.
Memory interleaving
This setting controls fabric level memory interleaving. Note that the channel, die and socket
have requirements on memory populations and it will be ignored if the memory doesn't
support the selected option. Options include Disabled and Auto.
Memory interleaving size
This setting controls the memory interleaving size. This determines the starting address
of the interleave (bit 8, 9, 10 or 11). OOptions include 256 Bytes, 512 Bytes, 1 KB, 2 KB,
4 KB, and Auto.
86