Coleman 5310 Use, Care & Assembly Manual page 23

Step
14
14-A
Side Burner Wire
9-Volt Battery
T I
EST THE GNITER
A SPARK SHOULD APPEAR AT
.
ELECTRODE TIP
I
F THE SPARK DOES NOT
:
APPEAR
-C
HECK THE WIRE
CONNECTIONS TO THE
.
MODULE
-C
HECK PROPER
ASSEMBLY OF FRESH
9-V
OLT BATTERY
Assemble the Electrode
Wires and the Battery to the
Electrode Module.
Note: The fuel hoses are not
shown in this step, for
simplicity.
14-B
Igniter Button Wires
(Note: Large Tabs)
:
.
9-Volt
Battery
Top Burner Wires
Electrode Module
14-A. Slip the Top Burner Wires through the
large hole in the Top Panel.
Slip the Side Burner Wire through the
large hole in the Left Panel.
Firmly push the Electrode Wires into
the Electrode Module.
Assemble the 9-Volt Battery to the
Electrode Module.
Note: The polarity is marked on the Electrode
Module.
Side Burner Wire
Electrode
Module
Top
Burner
Wires
23